A high and low-temperature test chamber is designed to simulate natural climatic conditions to test the high- and low-temperature resistance of products or materials under alternating temperature changes. Since the temperature conditions created by the test chamber are more extreme than natural climates, they further enhance the reliability of the tested products. In simple terms, this device is used to test the adaptability of products.
The test chamber can determine whether materials soften, age, lose efficiency, deform, or suffer potential damage under high-temperature conditions, as well as the severity of these issues, to assess the high-temperature resistance of products or materials. Additionally, it can test whether materials crack, have moving parts seizing up, become brittle, or experience changes like water freezing or component performance alterations under low-temperature conditions, and the impact of these changes, to assess low-temperature resistance.
To prevent accidents when using the test chamber, users must take several precautions:
Grounding the Equipment: Ensure that the outer casing of the test chamber is properly grounded. Failure to ground the equipment during installation can lead to electric shock if there is a leakage of electricity.
Complete Installation Before Use: Do not start the equipment until the test chamber is fully installed and all components are securely in place. Ensure that everything is correctly installed before beginning any tests.
Avoid Touching Moving Parts: When the equipment is running and the controller is driving components such as motors and fans, avoid touching any moving parts. Even if they appear stationary, sudden movement can cause injury. If it is necessary to access the moving parts, turn off the main power switch and ensure that all protective devices are in place.
Separate Power Supply for Heated Samples: If the test chamber contains samples that generate heat, do not use the machine’s own power supply to control the samples. Instead, use an external power source.
After purchasing a high and low-temperature test chamber, users must ensure basic safety measures are in place when conducting tests. Safety precautions should not be overlooked even when no tests are being conducted. Neglecting these safety measures can lead to test errors, equipment damage, and, more seriously, pose a threat to the user’s safety.
Temperature and humidity test chamber Salt spray test chamber Aging test chamber New Energy Test Chamber IP protection testing equipment Non standard customized laboratory High and Low Temperature Test Chamber Thermal Shock Test Chamber Constant Temperature and Humidity Test Chamber High and Low Temperature Low Pressure Test Chamber Salt Spray Test Chamber Rapid Temperature Change Test Chamber High and Low Temperature Alternating Humidity Test Chamber High and Low Temperature Humidity Test Chamber Low Temperature Test Chamber High Temperature Test Chamber High and Low Temperature Alternating Test Chamber Damp heat test chamber for antirust oil and grease UV Aging Test Chamber Ozone Aging Test Chamber Air-exchange Aging Test Chamber Rain Test Chamber Sand and Dust Test Chamber Sulfur Dioxide Test Chamber Mold Test Chamber Ultra-Low Temperature Test Chamber Salt Spray Corrosion Test Chamber Condensation Test Chamber HAST Test Chamber Thermal Vacuum Test Chamber Battery Explosion-proof Test Chamber battery test chamber Photovoltaic PV module UV test chamber Sunlight simulation test chamber Photovoltaic wet freezing test chamber Photovoltaic Dustproof Test Chamber
EN
中文
Pусский
Tiếng Việt
ภาษาไทย
پاکستانی زبان
