Temperature aging test chamber-Linpin Instruments

Product Parameter

Model	Studio Size (DWH)mm	Dimension（DWH）mm
LRHS-8M-LG	2000×2000×2000	Subject to contractual three-view
LRHS-15M-LG	2500×3000×2000
LRHS-30M-LG	3000×5000×2000
LRHS-60M-LG	5000×6000×2000

temperature range	RT+10℃～85℃/RT+10℃～150℃/ RT+10℃～200℃
Temperature uniformity	≤2℃ (at no load)
Temperature fluctuation	±0.5℃(at no load)
Time Setting Range	1～60000M
heating rate	RT+10℃～85℃≤30min
Outer case material	High-quality library board, CNC finishing
Inner box material	Imported high-grade stainless steel SUS304
Insulation material	Rigid polyurethane foam + fiberglass
Temperature Controller	Japan’s original imported “UEC” brand temperature meter
temperature sensor	PT100 platinum resistance temperature measurement body
overtemperature protector	Korea RAINBOW
Miniature Circuit Breaker	Schneider France
standard configuration		Emergency stop switch, three-color indicator light
security protection		Over-temperature, fan motor overheating, leakage protection Machine under-phase/reverse-phase, test timing, overload and short-circuit protection
Supply Voltage		AC380V±10% 50Hz
Power		15.0kW/20.5kW/28.0kW/35.0kW
operating environment		5℃～＋28℃ ≤85％RH
Note: 1、 the test data are used in the ambient temperature of 25 ℃ and well ventilated conditions measured 2、Can be customized according to the specific requirements of the user non-standard temperature aging test chamber etc 3、This technical information, subject to change without notice

Industry News

How should you handle common faults in a high-low temperature test chamber?

High-low temperature test chambers are precision instruments that must be operated strictly by trained personnel following standard procedures and subjected to regular preventive maintenance. Any operational error or neglected upkeep can trigger a variety of faults, delaying test schedules. The equipment integrates refrigeration, heating, humidification, electrical control and other subsystems. Effective troubleshooting therefore requires a holistic “whole-machine mindset” to pinpoint and solve problems quickly.

Why Should a Temperature & Humidity Test Chamber Use Purified Water?

You may have heard the recommendation that "a temperature & humidity test chamber should use purified water." But why is that? Can other types of water not be used?

High-Low Temperature Test Chambers Technical White Paper – Precision Solutions for Temperature-Environment Reliability Testing –

Temperature is the most fundamental—and most brutal—physical parameter influencing the reliability of materials, components and complete systems. GB/T 2423.1, GB/T 2423.2, GJB 150.3A, GJB 150.4A, DO-160 Section 4/5, IEC 60068-2-1/-2 and MIL-STD-810H all quantify requirements for temperature slew rate, dwell time, heat load and measurement uncertainty.