Share: Safety tips for the use of test chambers

Safety for any test chamber is very important, now the equipment are set up to protect the measures, in addition to these self-protection warning, in the usual use of equipment in the process also need to pay attention to the following points.

First, the test box electricity to pay attention to safety: the power cord of the equipment to be connected to the right, wiring work must be a professional electrician to operate, to avoid improper operation resulting in serious consequences, equipment installation time shell must be grounded, if the equipment is not grounded, a leakage of electricity may occur in the event of electric shock hazard, the equipment will be dangerous when running current, so once the equipment begins to work, non-operating Therefore, once the equipment starts to work, non-operating personnel are prohibited from opening the electric cabinet cover; if the specimen samples need to be energized to use an external power supply, not to use the local power supply of the test equipment.

Second, safe and correct operation of the equipment: want to make the test results of the test piece of high accuracy, then, must be in the equipment operation norms, because some operations or external conditions will greatly affect the test results, so improper operation try to avoid, from the safety point of view, some of the operation will not only affect the test results, but also trigger equipment failure, and even more serious consequences, in the equipment can not be run before installation! Equipment, need to configure the price of each group can only be put into use, clear equipment, the function of each component, and master the whole process of equipment operation (manufacturers usually carry out technical training, to avoid operators as soon as possible to master the operation process), the fixed work of the equipment should also be done to avoid the equipment in the role of the external forces of the impact of the situation, the machine is running, some of the components will be in the controller to start the operation of the controller, the machine is running, some of the components will start the operation, the machine is running, some of the components will start the operation, the machine is running. Never touch the components that are temporarily in a static state with your hands to prevent the components from starting suddenly and causing personnel injury.

Third, the safety of the environment around the equipment: equipment around do not have flammable and explosive substances, to avoid these safety hazards.

Fourth, the test box to pay attention to safety in the process of moving: late if the equipment to move, then you need to clean up the items in the box, to avoid falling test pieces in the box, in the process of transportation to do a good job of method, do not let the equipment have cuts or damage.