EN
中文 Pусский Tiếng Việt ภาษาไทย پاکستانی زبان
Linpin Instruments EN
Search for the product you are looking for
Hot search
Constant Temperature And Humidity Test Chamber Walk-in High and Low Temperature Test Chamber
Press Enter to search
Military Standard Sand and Dust Test Chamber

Military Standard Sand and Dust Test Chamber

Product Introduction
Military standard sand and dust test chamber is suitable for testing the sealing performance of the product shell, mainly used for the shell protection level standards specified in the IP5X and IP6X two levels of test. It mainly simulates the damage caused by sandstorm weather on locks, automobile and motorcycle parts, seals, power instruments and other products.

Service Hotline

+86 18017488690
Inquire Now Get A Quote
Location：Home > IP protection testing equipment > Military Standard Sand and Dust Test Chamber
Product Parameter
Studio Size  (D*W*H)mm 600×700×600（D*W*H）mm
Dimension（D*W*H）mm 4200×2200×2000（D*W*H）mm
temperature range 23℃～70℃
temperature deviation ≤±2℃
Humidity range ＜30%RH
Dust blowing air speed 1.5～8.9 m/s
Sand blowing wind speed 18.0～29.0 m/s
Blowing Dust Concentration 3.0～17.6 g/m³ (10.7 ± 7 g/m³)
sandblast concentration 0.18 + 0.2 g/m³；1.1 ± 0.3 g/m³；2.2 ± 0.5 g/m³
Test dust quartz dust
Sand Size ≤ 149 μm to pass through a 150 μm diameter mesh.
viewing window 300×300mm(Effective vision)
Outer case material High quality A3 steel plate electrostatic spraying
Inner box material Imported high-grade stainless steel SUS304
Temperature Controller Imported “UEC” brand temperature meter
standard configuration Fuse set
Supply Voltage AC380V±10% 60Hz
Power 45kW
operating environment 5℃～＋28℃ ≤85% RH
Note:
1、the above data are in the use of ambient temperature of 25 ℃ and well ventilated conditions measured
2、Can be customized according to the specific requirements of the user non-standard military standard sand and dust test chamber etc
3、This technical information, if there is any change without prior notice

 

Get A Quote
Name：*
Phone：*
Email：*
Your message information：
Product Recommendation
Sunlight Simulation Test Chamber
Sunlight Simulation Test Chamber
Fiberglass composite salt spray test chamber
Fiberglass composite salt spray test chamber
Pendulum Tube Rain Test Device
Pendulum Tube Rain Test Device
Constant Temperature And Humidity Test Chamber
Constant Temperature And Humidity Test Chamber
Cyclic Salt Spray Test Chamber
Cyclic Salt Spray Test Chamber
Industry News
Don’t Underestimate the Cleaning of High and Low-Temperature Test Chambers
Some may consider the cleaning of high and low-temperature test chambers a minor issue and not take it seriously. However, proper cleaning can improve equipment efficiency, reduce failure rates, and lower operational costs. This article emphasizes the importance of this task and provides a brief guide on cleaning procedures.
Don’t Underestimate the Cleaning of High and Low-Temperature Test Chambers
Two Types of Separators in High and Low Temperature Test Chambers
In the components of high and low temperature test chambers, separators are essential.
Two Types of Separators in High and Low Temperature Test Chambers
What Causes Oil Blockage in Thermal Shock Test Chambers?
During the transportation of a thermal shock test chamber, technicians often remind operators to keep the equipment as level as possible to avoid oil blockage.
What Causes Oil Blockage in Thermal Shock Test Chambers?
Follow WeChat

Copyright © 2025 Shanghai Linpin Instrument Co., Ltd Copyright

 | ICP Number：Shanghai ICP Record No. 12029585-7

 | Sitemap

Telegram WhatsApp Facebook VK LinkedIn