If the high and low temperature humidity test chamber is used frequently and for a long time, the water in the equipment’s water tank may not be sufficient to complete the test. In this case, it is necessary to add water. Some customers wonder whether it is possible to add an automatic water replenishment function to the equipment to allow it to add water intelligently, which can save some labor. However, for most users, is the automatic water replenishment function of the equipment necessary?
The main function of the automatic water replenishment function of the high and low temperature and humidity test chamber is to automatically add water to the equipment. Is this device and its function necessary? Generally speaking, during the operation of the equipment, there are operators to operate and maintain it. Usually, before conducting product tests, operators will check the equipment. If there is not enough water in the equipment, the staff will manually add water. These tasks are usually done before the equipment is put into operation. If such a situation occurs during the operation of the equipment, once the staff find a water shortage warning, they will handle it as soon as possible and replenish the water. As long as the preparatory work is done well in advance, such situations during the testing process are relatively rare. If the equipment is equipped with an automatic water replenishment device, if no one replenishes or replaces the water for a long time, the same problem will still exist. Once the water is used up, it still needs to be handled by the staff for manual water replenishment, only the replacement cycle is slightly longer. In addition, adding an automatic water replenishment function to the equipment will also increase its manufacturing cost, and the overall price of the equipment will also increase. You can consider whether you need an automatic device from multiple aspects such as cost and practicality, and which method is suitable for you.
If the high and low temperature and humidity test chamber does not use the automatic water replenishment function, are there other ways to deal with this problem? Nowadays, many manufacturers’ equipment is customized according to needs. After the customer tells the salesperson of the manufacturer about the specific requirements, the salesperson will provide you with a corresponding solution.
Temperature and humidity test chamber Salt spray test chamber Aging test chamber New Energy Test Chamber IP protection testing equipment Non standard customized laboratory High and Low Temperature Test Chamber Thermal Shock Test Chamber Constant Temperature and Humidity Test Chamber High and Low Temperature Low Pressure Test Chamber Salt Spray Test Chamber Rapid Temperature Change Test Chamber High and Low Temperature Alternating Humidity Test Chamber High and Low Temperature Humidity Test Chamber Low Temperature Test Chamber High Temperature Test Chamber High and Low Temperature Alternating Test Chamber Damp heat test chamber for antirust oil and grease UV Aging Test Chamber Ozone Aging Test Chamber Air-exchange Aging Test Chamber Rain Test Chamber Sand and Dust Test Chamber Sulfur Dioxide Test Chamber Mold Test Chamber Ultra-Low Temperature Test Chamber Salt Spray Corrosion Test Chamber Condensation Test Chamber HAST Test Chamber Thermal Vacuum Test Chamber Battery Explosion-proof Test Chamber battery test chamber Photovoltaic PV module UV test chamber Sunlight simulation test chamber Photovoltaic wet freezing test chamber Photovoltaic Dustproof Test Chamber
EN
中文
Pусский
Tiếng Việt
ภาษาไทย
پاکستانی زبان
