Search for the product you are looking for
Walk-in Sand and Dust Test Chamber

Walk-in Sand and Dust Test Chamber

Product Introduction
Walk-in sand and dust test chamber is suitable for testing the sealing performance of the shell of the product, mainly used for the shell protection level standard stipulated in the IP5X and IP6X two levels of test.

Service Hotline

4000-662-888
Product Features
Product Parameter
Model Studio Size  (D*W*H)mm Dimension(D*W*H)mm
LRHS-10M-PS 2000×2000×2500 2500×2300×3500
Time Setting Range 1~9999H   adjustable
air velocity Not more than 2m/s
Dust blowing method ±0.5℃/±2℃
sand and dust concentration 2~4kg/m³
Test dust Drying talcum powder, silicate cement, chimney ash, etc.
Vacuum pump flow control 60~600L/H
Dust dehumidification Electrically heated heating and dehumidification
Vibration time 1S-99H   adjustable
Dust blowing time 1S-99H   adjustable
recurring cycle Dust blowing time, stop time and total time can be set arbitrarily.
viewing window 395×395mm(Effective vision)
Outer case material High quality A3 steel plate electrostatic spraying
Inner box material Imported high-grade stainless steel SUS304
Temperature Controller “Taiwan Weilun” 7.0-inch color touch instrumentation
standard configuration Sample holders, dust scrapers, talcum powder
Optional accessories Vacuum system: rotary vane vacuum pump (equipped with vacuum piping device)
security protection Fan motor overheating, the overall equipment phase / reverse phase, leakage protection
Test timing, overload and short-circuit protection, automatic shutdown after fault alarms
Supply Voltage AC380V±10% 50Hz
Power 4.5kW 4.5kW 6.0kW 6.5kW
operating environment 5℃~+28℃ ≤85% RH
Note:
1、the test data are used in the ambient temperature of 25 ℃ and well ventilated conditions measured
2、Can be customized according to the specific requirements of the user non-standard walk-in sand and dust test chamber etc
3、This technical information, subject to change without notice

 

Product Recommendation
Industry News
There are significant differences between walk-in sand and dust test chamber and military standard sand and dust test chamber in many aspects.
If the temperature and humidity test chamber is a powerful tool for evaluating product performance, then the operators are the ones who wield this tool—and a critical factor that directly influences test results.
Stability is crucial for the accuracy of test results in aging test chambers. Are there any methods to maintain and improve the stability of the chambers during use?
Telegram WhatsApp Facebook VK LinkedIn