Search for the product you are looking for
Three-box  Cold and Thermal Shock Test Chambers

Three-box Cold and Thermal Shock Test Chambers

Product Introduction
Three-box cold and thermal shock test chambers is metal, plastic, rubber, electronics and other materials industry essential test equipment, used to test the structure of the material or composite material, in an instant by the extremely high temperature and very low temperature of the continuous environment can endure the degree of the specimen can be detected in a short period of time due to the expansion and contraction of the chemical changes caused by cold or physical injuries.

Service Hotline

+86 18017488690
Inquire Now Get A Quote
Product Parameter
Model Workshop size(D*W*H) mm External Dimension(D*W*H)mm
LRHS-100A-LW 450×500×450 1700×1440×1900
LRHS-150A-LW 500×600×500 1750×1540×2115
LRHS-225A-LW 750×600×500 2200×1540×2115
LRHS-320A-LW 800×800×500 2400×1740×2050
LRHS-500A-LW 1000×900×550 2600×1840×2080
Impact temperature range A:-45℃~150℃ B:-55℃~150℃ C:-65℃~150℃
High Temperature Chamber RT~180℃(unloaded)
cryostat temperature RT~-60℃(unloaded)
Temperature fluctuation ≤1℃(at no load)
temperature deviation ±3℃(at no load)
heating rate From room temperature~150℃≤25min(average throughout)
cooling rate From room temperature~-60℃≤50min(average throughout)
Temperature recovery time ≤5min
Time Setting Range 1~60000M
test hole For use with external test power or signal cables
Outer case material High quality A3 steel plate electrostatic spraying
Inner box material Imported high-grade stainless steel SUS304
Insulation material Rigid polyurethane foam + fiberglass
Temperature Controller Imported “UEC” brand temperature meter
temperature sensor PT100 platinum resistance temperature measurement body
Cooling method Two-machine cascade refrigeration
Compressor Tycon France / BITZER Germany
standard configuration Sample racks, 2 tiers, with condensate catch pan and drain out of the box
security protection Compressor overpressure overload, over temperature, leakage protection, fan motor overheating
Overall equipment under-phase/reverse-phase Overall equipment timing, overload and short-circuit protection
Supply Voltage AC380V±10% 50Hz
Power (A) 17.0kW/22.0kW/25.0kW 53.0kW/72.0kW
operating environment 5℃~+28℃ ≤85% RH
Note:
1、 the above data are in the use of ambient temperature of 25 ℃ and well ventilated conditions measured
2、Can be customized according to the user’s specific test requirements non-standard cold and thermal shock test chambers
3、This technical information, subject to change without notice

 

Get A Quote
Name:*
Phone:*
Email:*
Your message information:
Product Recommendation
Industry News
The non-uniform distribution of temperature and humidity in a constant temperature and humidity test chamber can affect the final results and lead to errors.
Rain test chambers are used to evaluate the waterproofing parameters and performance of automotive components, low-voltage electrical enclosures, and other products. These devices simulate relevant environmental conditions for testing.
However, the LINPIN product series, with its various types and models of salt spray test chambers
Telegram WhatsApp Facebook VK LinkedIn