Search for the product you are looking for
Fiberglass composite salt spray test chamber

Fiberglass composite salt spray test chamber

Product Introduction
Fiberglass composite salt spray test chamber for the assessment of the material and its protective layer of salt spray corrosion ability, as well as similar protective layer of process quality comparisons, and at the same time can be assessed for some of the products resistant to salt spray corrosion; used for parts and components, electronic components, the protective layer of metal materials, and industrial products of the composite salt spray corrosion test

Service Hotline

+86 18017488690
Inquire Now Get A Quote
Product Parameter
Model Studio Size  (D*W*H)mm Dimension(D*W*H)mm
LRHS-108-RFHY 450×600×400 Subject to contractual three-view
LRHS-270-RFHY 600×900×500 Subject to contractual three-view
LRHS-412-RFHY 750×1100×500 Subject to contractual three-view
LRHS-663-RFHY 850×1300×600 Subject to contractual three-view
LRHS-816-RFHY 850×1600×600 Subject to contractual three-view
LRHS-1080-RFHY 900×2000×600 Subject to contractual three-view
temperature range RT+5℃~80℃
Humidity range 30%~98% RH
Saturated drum temperature RT+10℃~70℃
Temperature uniformity ≤2℃
Temperature fluctuation ±0.5℃
Salt spray deposition 1~2ml/80 cm².h(16-hour average)
Compressed air pressure 2.00±0.01(kg/cm²)
Spraying method Continuous/periodic selectable
Specimen holder angle 20±5°
Test Methods NSS test AASS test CASS test
Case Material Fiberglass reinforced plastic (FRP)
Lid Material Fiberglass reinforced plastic (FRP)
Air-saturated drums High quality premium stainless steel SUS304
Pressurized Air Hose Material High quality rubber hose
Other pipelines Thickened Fluorosilicone Rubber Tubing
Temperature Controller High-quality “UEC” brand temperature and humidity meter
Dehumidification and cooling Single or double cascade refrigeration
Compressor Taikang, France
temperature sensor PT100 platinum resistance temperature measurement body
heater Titanium Heating Tube
interrupter Schneider miniature circuit breakers (to prevent short circuits in control circuits)
standard configuration V-shaped sample holder, round rod, nozzle, funnel, measuring cylinder, mist exhaust pipe
security protection Phase loss/reverse phase for the entire machine, equipment timing, rapid mist exhaust indicator, test completion

Over-temperature, low water level protection, leakage current, short circuit, compressor overpressure overload

Supply Voltage AC380V±10% 50Hz
Power 8.5kW/10.0kW/12.0kW/13.5kW/15.0kW/17.5kW
Temperature: 5℃~+35℃((Average temperature over 24 hours ≤ 28°C)
Relative Humidity: ≤85%RH
Note:
1、 the above data are in the use of ambient temperature of 25 ℃ and well ventilated conditions measured
2、Can be customized according to the user’s specific requirements, such as non-standard test chamber
3、This technical information, if there is any change without prior notice

 

Get A Quote
Name:*
Phone:*
Email:*
Your message information:
Product Recommendation
Industry News
The salt spray test chamber is primarily used to evaluate the corrosion resistance of test samples. It is widely applied in industries such as electrical engineering, digital accessories, plastic products, and aerospace manufacturing to assess the corrosion resistance of products and simulate their performance under extreme environmental conditions.
Thermal shock test chambers are essential tools for verifying a product’s ability to withstand extreme temperature changes. However, in practical applications, neglecting operational details can lead to inaccurate test results, sample damage, and even equipment failure.
In the field of quality inspection and reliability testing, constant temperature and humidity test chambers and high and low temperature test chambers are two commonly used environmental simulation devices, each with unique functions and application scenarios.
Telegram WhatsApp Facebook VK LinkedIn