Search for the product you are looking for
Air-Cooled Xenon Lamp Climate Test Chamber

Air-Cooled Xenon Lamp Climate Test Chamber

Product Introduction
Air-Cooled Xenon Lamp Climate Test Chamber can simulate the full sunlight spectrum of the xenon arc lamp to reproduce the destructive light waves that exist in different environments, can be used for scientific research, product development and quality control to provide the appropriate environmental simulation and light accelerated aging test.

Service Hotline

+86 18017488690
Inquire Now Get A Quote
Product Parameter
Model Studio Size  (D*W*H)mm Dimension(D*W*H)mm
LRHS-190F-SN 500×760×500 1200×1270×1650
temperature range RT+10℃~70℃
Humidity range 65%~98%RH
Blackboard temperature 63℃~100℃
Temperature uniformity ≤2.0℃(in darkness)
Temperature fluctuation ±0.5℃(in darkness)
Humidity Deviation +2、-3% RH
Nozzle Aperture Ф0.8mm
rainfall pressure 0.12~0.15Mpa
timing of rainfall 1~999M, Adjustable for continuous rainfall
Spraying cycle 18min/102min或12min/48min(Spraying time/stopping time)
photoperiod 1~999h、m、s continuously adjustable
Sample tray size 450×720mm
Distance between sample holder and lamp 230~280mm
longitudinal 290~800nm
radiation intensity ≤550W/㎡
Xenon lamp power 2.5kW×3支=7.5kW
Heating power 3.0kW
Humidifying power 2.0kW
Outer case material High quality A3 steel plate electrostatic spraying
Inner box material  Imported high-grade stainless steel SUS304
Temperature and humidity controller “Taiwan Weilun” touch screen + ‘Germany Siemens’ PLC module
Temperature and humidity sensors  PT100 platinum resistance temperature measurement body
standard configuration 3 lamps, 1 sample rack
security protection Compressor overpressure overload, fan motor overheating, equipment over-temperature, the overall equipment under phase / reverse phase
Equipment timing, leakage protection, water shortage protection, automatic shutdown after the fault alarm and other protections
Supply Voltage AC380V±10% 50Hz
Power 14.5kW
operating environment 5℃~+28℃ ≤85% RH
Note:
1、 the above data are used in the ambient temperature of 25 ℃ and well ventilated conditions measured
2、Can be customized according to the specific requirements of the user non-standard Air-Cooled Xenon Lamp Climate Test Chamber etc
3、 the technical information, subject to change without notice

 

Get A Quote
Name:*
Phone:*
Email:*
Your message information:
Product Recommendation
Industry News
It is crucial to operate a high and low temperature test chamber correctly.
The humidification process in a constant temperature and humidity test chamber essentially involves increasing the water vapor partial pressure. The initial humidification method was to spray water onto the chamber walls and control the water temperature to regulate the saturation pressure of the water surface.
Correct operation of the temperature control system of a salt spray test chamber is extremely important because it ensures the accuracy of the test.
Telegram WhatsApp Facebook VK LinkedIn