Home > Products > Accelerated Aging Chambers >

Air-cooled Xenon Lamp Aging Test Chamber

Model:190L or Customeized

Apply to:Accelerate Aging Test,Xenon Lamp Test

Application:Paint,Plastic,Rubber,Fabric,Cable,Glass etc

  • Feature
  • Specification


    Lenpure Air-cooled Xenon Aging Test Chamber adopts xenon arc-lamp which can realize full wavelength of natural sunlight to the most extent, so that to reappear destructive light radiation of different environment. Also can simulate rainfall, high & low temperature and moisture of natural environment, so that it can perform extremely realistic accelerated weathering test on material and coating layer


    ▪High performance and quiet operation (20~ 70 dBa)
    ▪Touch-screen controller, user-friendly
    ▪Import Q-Lab air-cooled Full spectrum xenon lamp, more economical, more efficient and easier to maintain. Lamp life of 1800 hours.
    ▪The flat sample mounting tray can accommodate different shapes and sizes of samples, including 3D parts. There are a variety of sample stents to choose from
    ▪The irradiance control system continuously monitors and controls the output of the light, which ensures accurate exposure and repeatable test results.
    ▪Allows the user to simultaneously control and monitor relative humidity, blackboard temperature and air temperature in the box.
    ▪All circuits fused or circuit breaker protected, overload protection.
    ▪All wiring numbered or color coded
    ▪ Tri-color Indicator and EMO (Emergency-off Switch) available.

    Test Standards

    IEC 68-2 / IEC 60068-2
    ISO 4892-2 / ISO 3917 / ISO 11341 / ISO 105-B02/06 / ISO4665-3
    JISK 6781
    UL 62275

    This test equipment comply with above test standards (but not limited to):

    Volume (L)
    Temperature Range
    Rated Power 
    Internal Dimension (mm) D*W*H
    External Dimension             (mm) D*W*H
    RT10°C ~ 70°C
    Basic Specification
    Temperature Range RT10°C ~ 70°C
    Temperature Fluctuation ±0.5°C
    Temperature Uniformity ±2.0°C
    Blackboard / Black Standard Temperature 60°C ~ 100°C
    Humidity Range 65% ~ 99%
    Humidity Deviation +2 / -3% R.H
    Spray Nozzle Dia Ф0.8mm
    Rainfall Pressure 0.12~0.15Mpa
    Rainfall Time 1~999m, adjustable
    Spray period 18min/102min or 12min/48min
    Illumination period 1~999h、m、s   Continuous adjustable
    Sample holder size 450×720mm
    Radiation Indensity ≤550W/m2
    Wave Length 290~800nm
    Xenon arc lamp power 2.5KW×3 pcs = 7.5KW
    External Casing Cold-rolled A3 (Q235) steel plates with plastics painted. 
    Interior Working Room Stainless Steel Plates SUS304 with miror surface
    Heat Isolation Polyurethane foams and fine glass fibres
    Illumination Lamp Philips® one in per standard test chamber.
    Casters 4pcs, with PU covered for protection. Height adjustable and direction universal. 
    Viewing Window Multi-layer hollow toughened glass with conductive films for heating to defrost
    Door Manually operated sliding door with unlock button
    Heating & Cooling System
    Heater Steipped Nickel-chromium Wire Heater
    Air Blower Anti-temperature stainless fan blades with low noise
    Compressor Hermetically-sealed Techmesh® or semi-sealed Bitzer® or GEA® or equivalent compressors
    Cooling Method Single or dual cooling (Air-cooled or Water-cooled)
    Refrigerant R404A or/and R23 (eco-friendly)
    Condenser Plate-type heat exchanger
    Control System
    Controller 7" Programmable colorful touch-screen display
    LCD English Display
    Microcomputer integrated controller
    Temperature Sensor Platinum Resistance.PT100Ω
    Standard Configuration Test Chamber x 1, Specimen Holder platform x 1, Xenon arc lamp x 1
    Safety Protection Power leakage protection/Compressor over-heat, over-load or over-current protection/Dry burning protection.
    Voltage AC220V/380V/440V±10%, 50Hz/60Hz or as per requirement
    Ambient Enviromental for application 5°C~+30°C ≤ 85% R.H