Home > Products > Non-standard Chambers >

Lift-type Rain Drip Test Machine

Model: LRHS-DT-Rain

Apply to: Waterproof Test

Application: Vehicles parts, Electrical Components, Precision Instruments, LDE lights, etc.

  • Feature
  • Specification

    Overview

    Lift-type Rain Test Chamber meets MIL-STD-810G Method 506.5 Procedure III, which is to test waterproof ability of test item. It uses a test setup that provides a volume of water greater than 280L/m2/h dripping from a dispenser with drip needles. The test item will be placed under the water drip tank to bear dripping water droplets.
    The height of this test machine is adjustable, max height is 4000 mm.
     

    Feature

    ● Height liftable, Max height is 4000 mm.
    ● Big Drip Tank to generate large dripping area.
    ● Drip Nozzle needles are screw-in type, tightly installed.
    ● Touch-screen programmable controller
    ● Data logging and download available.
    ● Control cabinet and test machine are separate for protection.
    ● Touch-screen controller, remove monitoring on PC is available.
    ● Easy-to-operate controlling models.
    ● Rotational speed of rotary table is adjustable.
    ● Removable motor protective casings for maintenance access.
    ● Fixable and movable casters with great convenience.
    ● Multiple protections on Water leakage, phase sequence, power leakage, etc.
    ● Easily accessible maintenance elements
     

    Test Standard

    This test equipment conforms to following test standard:
    ● MIL-STD-810G 506.5 Procedure III

    Sizes of Lift-type Rain Drip Test Machine
    Model
    /
    /
    Dimensions of Water Drip D*W*H(mm)
    LRHS-DT-Rain
    /
    /
    1950*2000*4000 (adjustable)
    Basic Specification
      performance Water Volume >280 L/m2/h
    Velocity of Droplets 9 m/s
    Test Time Adjustable
    Material
    External Casing Cold-rolled A3 (Q235) steel plates with plastics painted. 
    Drip Nozzles Screw-in type, tight installation
    Fixture Fixed and adjusted by screws
    Casters With PU covered for protection. Fixable and moveable.
    Control System Controller Programmable Touch-screen controller with data logging and download function
    Safety Protection Power leakage protection, over-load or over-current protection/Dry burning protection.
    Voltage AC220V/380V/440V±10%, 50Hz/60Hz or as per requirement
    Test Standards MIL-STD-810G 506.5 Procedure III
    Note For further detailed specification, please contact Lenpure.