Shanghai Linpin Instrument Stock Co., is the largest scale environmental test chambers manufacturer in China, which working in this filed for more than 15 years. Lenpure company offers a full range of standard or custom-designed environmental test chambers providing our customers with technical solutions to meet their all demanding of environmental testing requirements.
These chambers range from small bench top chambers to full walk-in test rooms.
According to the different test conditions and test requirements, Lenpure company productions could divide into different types, such as:
Temperature and Humidity Climate Chambers
Programmable Temperature Climate Chambers
Salt Spray Climate Chambers
IP Ingress Protection Level Rain/Sand Climate Chambers
Drug Stability Climate Chambers
Temperature and Pressure Climate Chambers
Two/Three Zones Thermal Shock Climate Chambers
PV Module/UV Aging Climate Chambers
Xenon Lamp Climate Chambers and so on.
Lenpure Salt Spray Test Chambers not only could evaluate anti-corrosion ability of material and material coating, but also can make a comparsion about the product techniques and quality of similar coating and products. It usually be used to test the electronic elements, and metal materials and industtrial products, etc.
The Features of Lenpure salt spray test chambers
▪ 7'' Colorful Programmable touch screen controller, user-friendly, can remoto-control
▪ Imported reinforced hard PP plates with smooth and flat surface
▪ Imported transparent impact-resistant plates as observe window
▪ All pipe is anti-corrosion can be used 15years.
▪ Adopt water seal method to prevent leakage of salt spray.
▪ With air pressure cylinder for convenient operation.
▪Independent heating system, fast speed, temperature and humidity are evenly distributed
▪ Equipped with automatic demisting device
▪ Fault alarm and resolution remind function
▪ Power failure protection function
▪ Self-diagnosis function
▪ Calendar timing function
▪ Tri-color Indicator and EMO (Emergency-off Switch) available.
Test Standards of Lenpure salt spray test chambers
ASTM B117, G85, BS 3900 F4/F9 , DIN 50-021, ISO 9227, IEC 68-2, JIS H8502
This test equipment comply with above test standards (but not limited to).
After-sales Service of Lenpure salt spray test chambers
Duration: 1 year after the B/L date,with lifetime technology support.
After-sales Methods:
1. Via email, telephone, social software (wechat, skype, whatsapp, etc),
video conference, etc.
2. Engineers going to site for installation or troubleshooting with reasonable charges (especially for non-standard walk in climatic chambers).
Charges:
If parts were broken not artificially during warranty, the new parts will be sent to you without charges or express cost (FedEx, DHL, TNT, etc).
If parts were broken beyond warranty, reasonable cost (generally at a low price ) will be charged for new replacements.
Basic Specification of Lenpure salt spray test chambers
| Model | Volume (L) | Temperature Range(°C) | Rated Power | Internal Dimension (mm) D*W*H |
External Dimension (mm) D*W*H |
| LRHS-108-RFHY | 108 | -30°C ~ 80°C | 8.5kW | 450*600*450 | 780*1140*1050 |
| LRHS-270-RFHY | 270 | 10.0kW | 600*900*500 | 960*1460*1150 | |
| LRHS-412-RFHY | 412 | 12.0kW | 750*1100*500 | 1100*1730*1240 | |
| LRHS-663-RFHY | 663 | 13.5kW | 850*1300*600 | 1230*2150*1410 | |
| LRHS-816-RFHY | 816 | 15.0kW | 850*1600*600 | 1230*2450*1460 | |
| LRHS-1080-RFHY | 1080 | 17.5kW | 900*2000*600 | 1280*2850*1460 | |
| Basic Specification | |||||
| Performance | Temperature Range | -30°C ~ 80°C | |||
| Air Saturator | RT+10°C ~ 70°C | ||||
| Humidity Range | 30% ~ 98% RH | ||||
| Temperature Fluctuation | ±0.5°C | ||||
| Temperature Uniformity | ≤ 2.0°C | ||||
| Temp. ramp up rate | 0.5℃～1.5℃/min | ||||
| Temp. ramp down rate | 0.5℃～1.0℃/min | ||||
| Salt fog fall-out Rate | 1～2ml/80 cm².h（Ave in 16 hours） | ||||
| Air Pressure | 2.00±0.01（kg/cm²） | ||||
| Spray Method | Optional continuous/periodic test time: 1～9999 H、M、S (Adjustable) | ||||
| Period time | 1～99 H , M , S (Adjustable) | ||||
| Test specimen shelf | Test specimen shelf can meet the requirements of 15℃～30℃ tilt test | ||||
| Material | Chamber material | Be made of imported reinforced hard PP plates with smooth and flat surface | |||
| Saturated air cylinder | Made of imported high-quality mirror-finished stainless steel plates (SUS304) | ||||
| Pipe | Reinforced fluorosilicone rubber tube | ||||
| Casters | 4pcs, with PU covered for protection. Height adjustable and direction universal. | ||||
| Compressor | Hermetically-sealed Techmesh® or semi-sealed Bitzer® or GEA® or equivalent compressors | ||||
| Cooling Method | Single or dual cooling (Air-cooled or Water-cooled) | ||||
| Refrigerant | R404A or/and R23 (eco-friendly) | ||||
| Viewing Window | Multi-layer hollow toughened glass | ||||
| Control System | Breaker | Schneider miniature circuit breaker | |||
| Heater | Steipped Nickel-chromium Wire Heater | ||||
| Controller |
7'' HD true color LCD touch display Have the function of Real-time monitoring, and store 600 days of historical records, is allowed to export or upload data with U disc , also can realised remoto control |
||||
| Temperature Sensor | Platinum Resistance.PT100Ω | ||||
| Standard Configuration | Round stick , V-shaped sample shelf , Glass nozzle , Funnel , metering cylinder , Flexible pipe . Depend on chamber Model | ||||
| Safety Protection | Power leakage protection, Low water level protection, over-load or over-current protection/Dry burning protection. | ||||
| Voltage | 380V/440V±10%, 50Hz/60Hz or as per requirement | ||||
| Ambient Enviromental for application | 5°C～+30°C ≤ 85% R.H | ||||
BMW Standards Testing - Applied Technical Services: Corrosion Testing Standards
The test standard summaries are for general guidance only. Though believed to be accurate at the time of writing, this may change over time. So this information should not be used as a substitute for referring to a complete test standard, at an appropriate revision level.
Note: The terms salt spray, salt mist & salt fog are all in wide spread use within corrosion test standards. In this context they can be considered to be equivalent and interchangeable terms.
AA-0224 (AA-P 175)
Verification of the corrosion behaviour of surface coatings and of adhesive bonds.
It is a 7 day cyclic corrosion test (CCT) comprising of the following steps:
Monday: Start of the cycle 24 hours salt spray according to AA-0324.
Tuesday to Friday: 08.00 to 16.00 hrs condense water constant climate at 40°C according to AA-0213.
From 16.00 until 08.00 hrs regeneration at room temperature (opened chamber or ventilated chamber)
Saturday to Sunday: Regeneration at room temperature (opened chamber or ventilated chamber).
If you are still interested in any kind of environmental test chambers, and I'm pleased provide some of our details and project to you. That's more, at present we have more attractive price for you. Welcome for inquiry any time, I will reply asap!
If you want to know more information about climate chambers or our company, please feel free to contact sales@lenpure.com or visit http://www.lenpure.com/ .
